Mitsubishi MELSEC iQ-F, User Manual

Page: 171 / 182

APPX
Appendix 4 Buffer Memory Areas
169
A
CH1 Input type/range setting
This area is for setting an input type and range setting.
A channel where the set value is other than the above causes an input type/range setting range error (error code: 190  H).
■
Buffer memory address
The following shows the buffer memory address of this area.
■
Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■
Default value
The default value is conversion disabled (000FH).
Setting value (Hexadecimal) Input type Input range
000FH Conversion disable

0003H Current 4 to 20 mA
0010H 0 to 20 mA
0006H -20 to +20 mA
0011H Voltage 1 to 5 V
0012H 0 to 5 V
0000H -10 to +10 V
0013H 0 to 10 V
0014H Resistance temperature detector Pt100
0015H Ni100
0016H Thermocouple Thermocouple B
0017H Thermocouple R
0018H Thermocouple S
0009H Thermocouple K
000AH Thermocouple J
000BH Thermocouple T
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Setting Input type/range 598 798 998 1198 1398 1598 1798 1998