Mitsubishi MELSEC iQ-F, User Manual

Page: 164 / 182

162
APPX
Appendix 4 Buffer Memory Areas
CH1 Conversion setting at disconnection detection
Set what value is to be stored in 'CH1 Digital output value' (Un\G400) at the time of disconnection detection.
For details on the disconnection detection function, refer to the following.

Page 43 Disconnection Detection Function
Setting a value other than the above results in operation with Downscale (1).
■
Buffer memory address
The following shows the buffer memory address of this area.
■ Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■
Default value
The default value is Downscale (1).
CH1 Logging enable/disable setting
Set whether to enable or disable the logging function.
For details on the logging function, refer to the following.

Page 59 Logging Function
Setting a value other than the above causes a logging enable/disable setting range error (error code: 1D0

H).
■
Buffer memory address
The following shows the buffer memory address of this area.
■
Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■ Default value
The default value is Disable (1).
Setting value Setting content
0 Upscale
1 Downscale
2 Any value
3 Value just before disconnection
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Conversion setting at disconnection detection 534 734 934 1134 1334 1534 1734 1934
CH  Conversion setting at disconnection detection (In FX2N
allocation mode function)
1271 1272 1273 1274 1275 1276 1277 1278
Setting value Setting content
0 Enable
1 Disable
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Logging enable/disable setting 535 735 935 1135 1335 1535 1735 1935
CH  Logging enable/disable setting (In FX2N allocation mode
function)
9161 9162 9163 9164 9165 9166 9167 9168