Mitsubishi MELSEC iQ-F, User Manual

Page: 157 / 182

APPX
Appendix 4 Buffer Memory Areas
155
A
CH1 Process alarm upper upper limit value
Set an upper upper limit value of the alert output function (Process alarm).
For details on the alert output function, refer to the following.

Page 36 Alert Output Function
■
Buffer memory address
The following shows the buffer memory address of this area.
■
Setting range
The possible setting range is from -32768 to +32767.
■
Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■
Default value
The default value is set to 0.
CH1 Process alarm upper lower limit value
Set an upper lower limit value of the alert output function (Process alarm).
For details on the alert output function, refer to the following.

Page 36 Alert Output Function
■
Buffer memory address
The following shows the buffer memory address of this area.
■
Setting range
The possible setting range is from -32768 to +32767.
■
Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■
Default value
The default value is set to 0.
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH

Process alarm upper upper limit value 514 714 914 1114 1314 1514 1714 1914
CH  Process alarm upper upper limit value (in FX2N
allocation mode function)
81 82 83 84 85 86 87 88
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH

Process alarm upper lower limit value 516 716 916 1116 1316 1516 1716 1916
CH  Process alarm upper lower limit value (in FX2N
allocation mode function)
1191 1192 1193 1194 1195 1196 1197 1198