Mitsubishi MELSEC iQ-F, User Manual

Page: 173 / 182

APPX
Appendix 4 Buffer Memory Areas
171
A
CH1 Input type/range setting (Offset/gain setting)
The area is to set the range setting (Offset/gain setting).
Setting a value other than the above causes an input type/range setting range error (error code: 190  H).
■
Buffer memory address
The following shows the buffer memory address of this area.
■
Enabling the setting
Turn off → on → off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■ Default value
The default value is Factory default setting (0).
Error history
Up to 16 errors that occurred in the multiple input module are recorded.
*1 These values assume that an error occurs at 10:35 and 40.628 seconds on Monday, January 30th, 2017.
■
Buffer memory address
The following shows the buffer memory address of this area.
Setting value Description
0 Factory default setting
1 User range setting
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Setting Input type/range (Offset/gain setting) 599 799 999 1199 1399 1599 1799 1999
CH  Setting Input type/range (Offset/gain setting) (In FX2N
allocation mode function)
1311 1312 1313 1314 1315 1316 1317 1318
Item Storage contents Storage example
*1
First two digits of the year/Last two digits of the
year Stored in BCD code. 2017H
Month/Day 0130H
Hour/Minute 1035H
Second 40H
Day of the week One of the following values is stored in BCD code.
Sunday: 0, Monday: 1, Tuesday: 2, Wednesday: 3, Thursday: 4,
Friday: 5, Saturday: 6 1H
Millisecond (upper) Stored in BCD code. 06H
Millisecond (lower) 28H
Buffer memory name No.1 to No.16
Error history 3600 to 3759
Error history (In FX2N allocation mode function) 8600 to 8759
b15 b8 b7 b0
…
Error code
First two digits of the year Last two digits of the year
Month Day
Hour Minute
Second Day of the week
Millisecond (higher-order digits) Millisecond (lower-order digits)
Un\G3600
Un\G3604
Un\G3603
Un\G3602
Un\G3601
Un\G3605
Un\G3606
Un\G3609
to
to
System area