Mitsubishi MOTORS i-MiEV, Owner'S Manual

Page: 209 / 297

Air conditioning
7-6 Comfort controls
7
The vents change to the following positions
according to the position of the temperature
control dial.
Refer to “Temperature control dial” on page
7-5.
N00736800400
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch.

Outside air {Indicator light (A) OFF}
Outside air is introduced into the passen-
ger compartment.
 Recirculated air {Indicator light (A) ON}
Air is recirculated inside the passenger
compartment.
If high cooling performance is desired, or, if
the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
“AUTO” position
Temperature control
dial position
Vents
Between “C” and mid-
dle(  )
: Upper part
of front passen-
ger compart-
ment
Mid-
dle(  )
Set the dial to
middle (  )
from the “C”
side
: Upper part
of front passen-
ger compart-
ment
Set the dial to
middle (  )
from the “H”
side
: Leg area
Between
middle
(  ) and
“H”
Near middle
(  )
: Leg area
Near “H”
: Leg area,
windshield, and
door windows
CAUTION
 When using the mode selection dial between
the “
” and “ ” positions, prevent fog-
ging by pressing the air selection switch to
select outside air. (Refer to “Air selection
switch” on page 7-6.)
Air selection switch
CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.
NOTE
 When the mode selection dial is set to the
“
” position, the air conditioning com-
pressor runs automatically. Outside air intro-
duction will also be selected automatically.
 When the temperature control dial is set to
the “C” position, the air selection will be
automatically set to the recirculation posi-
tion.
BK0220400US.book 6 ページ ２０１４年１１月１８日 火曜日 午前７時２７分