manualshive.com logo in svg

Mitsubishi MOTORS i-MiEV, Owner'S Manual

The Mitsubishi MOTORS i-MiEV electric vehicle is a sustainable and innovative transportation solution. To ensure optimal usage, we provide a comprehensive user manual that can be downloaded for free from our website. Discover all the features and functionalities of the i-MiEV by accessing the manual directly at manualshive.com.

Share
Download
background image

Electric power steering system (EPS)

Features and controls

5-27

5

N00531700590

Avoid hard braking and high-speed driving.
Stop the vehicle in a safe place, put the selec-
tor lever to the “P” (PARK) position and turn
off the electric motor unit.
Restart the electric motor unit and check to
see whether the light goes out after a few
minutes driving; if it then remains off during
driving, there is no problem.
However, if the warning light does not disap-
pear, or if it comes on again when the vehicle
is driven, we recommend you to have the
vehicle checked.

The ABS and brake force distribution func-
tion may not work, so hard braking could
make the vehicle unstable.
Avoid hard braking and high-speed driving.
Stop the vehicle in a safe place and we rec-
ommend you to have the vehicle checked.

N00568400058

The power steering system operates while the
electric motor unit is running. It helps reduce
the effort needed to turn the steering wheel.
The power steering system has mechanical
steering capability in case the power assist is
lost. If the power assist is lost for some rea-
son, you will still be able to steer your vehi-
cle, but you will notice it takes much more
effort to steer. If this happens, have your vehi-
cle inspected at a certified i-MiEV dealer.

If the warning light illuminates 
while driving 

If only the ABS warning light illu-
minate 

If the ABS warning light and 
brake warning light illuminate at 
the same time 

NOTE

The warning light may be illuminated when
the electric motor unit is started while the
12V starter battery voltage is low, but this is
not an ABS malfunction.
When the main drive lithium-ion battery is
charged, the 12V starter battery is charged at
the same time, and the warning light will go
out.
If the warning light does not go out or illumi-
nates from time to time even after the battery
is charged, take your vehicle to a certified i-
MiEV dealer and have the system checked as
soon as possible.

After driving on snow or icy roads, remove
any snow and ice which may have been left
around the wheels. On vehicles that have an
anti-lock braking system, be careful not to
damage the wheel speed sensors (A) or the
cables located at each wheel.

Front

Electric power steering sys-
tem (EPS) 

Rear

BK0220400US.book  27 ページ  ２０１４年１１月１８日　火曜日　午前７時２７分

Summary of Contents for i-MiEV










































































































































































































































































































Reviews:

No comments

Related manuals for i-MiEV

ABL Wallbox eM4 Single Installation Manual preview
Wallbox eM4 Single
Brand: ABL Pages: 68
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
Kolpin Outdoors 25-1080 Assembly & Owners Manual preview
25-1080
Brand: Kolpin Outdoors Pages: 6
Schartec CR 4 Manual preview
CR 4
Brand: Schartec Pages: 2
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
GMC Envoy XUV 2004 Getting To Know Manual preview
Envoy XUV 2004
Brand: GMC Pages: 20
Parkeon StradaPAL Installation Manual preview
StradaPAL
Brand: Parkeon Pages: 43
UAZ 2001 ???-3741 Instruction Manual preview
2001 ???-3741
Brand: UAZ Pages: 112
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
ZAPTEC ZapCharger Portable C1 User Manual preview
ZapCharger Portable C1
Brand: ZAPTEC Pages: 20
Columbia THERAPEDIC 2000 Instructions For Use Manual preview
THERAPEDIC 2000
Brand: Columbia Pages: 14
Speedtech 64-67 Instructional Manual preview
64-67
Brand: Speedtech Pages: 12
Ace K9 HA-2520 Installation Manual preview
HA-2520
Brand: Ace K9 Pages: 14
Buick 2010 Lucerne Owner'S Manual preview
2010 Lucerne
Brand: Buick Pages: 475
LetsGoAero V2 Two-Bike Carrier User Manual preview
V2 Two-Bike Carrier
Brand: LetsGoAero Pages: 2
RAM PROMASTER 2021 Owner'S Manual preview
PROMASTER 2021
Brand: RAM Pages: 288

Brands by name

Popular brands

Load more brands