manualshive.com logo in svg

Mitsubishi MOTORS i-MiEV, Owner'S Manual

The Mitsubishi MOTORS i-MiEV electric vehicle is a sustainable and innovative transportation solution. To ensure optimal usage, we provide a comprehensive user manual that can be downloaded for free from our website. Discover all the features and functionalities of the i-MiEV by accessing the manual directly at manualshive.com.

Share
Download
background image

MiEV Remote System

3-46

General information/Charging

3

A. By using the MiEV Remote

1. When the power of MiEV Remote is

off, turn the power ON. Refer to “To
turn the MiEV Remote ON/OFF” on
page 3-42.

2. Press the manual charging switch (J),

then press the power/communication
switch (B) for less than 1 second.

3. Canceling Charging Timer is com-

plete, and the MiEV Remote will
sound two different melodies.

4. Turn off the MiEV Remote. Refer to

“To turn the MiEV Remote ON/OFF”
on page 3-42.

B. By operating the electric motor switch on

the vehicle
Turn the electric motor switch to the
“ACC” or “ON” position, then turn back
to the “LOCK” position.
Canceling the Charging Timer is now
complete.

N01204201035

Charging Timer cannot be canceled by dis-
connecting the charge connector before the
time set by the ON timer. The Charging
Timer will resume when the charging con-
nector is again connected to the vehicle.

NOTE

If the manual charging switch (J) is pressed,

the 

 symbol of MiEV Remote will

blink. Remote Climate Control is also
stopped.

NOTE

Remote Climate Control 

WARNING

The Remote Climate Control, even when
set, cannot be relied upon to maintain safe
vehicle cabin temperatures while the vehi-
cle is stopped or parked. Never leave chil-
dren or persons requiring
supervision/nursing unattended inside the
vehicle. Temperature inside the vehicle
could become extremely high or low
resulting in a risk of heat stroke or hyper-
thermia that could result in death.
In addition, children can activate switches
and controls, resulting in an injury or
fatal accident.

While the Remote Climate Control is acti-
vated, keep away from the cooling fan
under the front hood, since the cooling fan
may automatically operate even if the
electric motor switch is in the “LOCK”
position.

NOTE

The Remote Climate Control works regard-
less the position of the air conditioning
switch or dial on the vehicle. While the
Remote Climate Control is activated, the air
conditioning switch or dial on the vehicle
will not affect operation of the cooler, heater
or defroster.

BK0220400US.book  46 ページ  ２０１４年１１月１８日　火曜日　午前７時２７分

Summary of Contents for i-MiEV










































































































































































































































































































Reviews:

No comments

Related manuals for i-MiEV

RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
Code 3 21 COVERT Series Installation And Operation Instructions Manual preview
21 COVERT Series
Brand: Code 3 Pages: 16
Metra Electronics 70-5511 Installation Instructions preview
70-5511
Brand: Metra Electronics Pages: 2
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
TOPPOINT LT95090 Quick Start Manual preview
LT95090
Brand: TOPPOINT Pages: 2
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Brand: Waeco Pages: 120
Ranger design 1525-PC Installation Manual preview
1525-PC
Brand: Ranger design Pages: 22
Gacell SLH 27C User Manual preview
SLH 27C
Brand: Gacell Pages: 25
Car-Interface CI-RL4-R40 Manual preview
CI-RL4-R40
Brand: Car-Interface Pages: 25
Black Horse Off Road TR-JECOOE Installation Instructions preview
TR-JECOOE
Brand: Black Horse Off Road Pages: 3
Mazda 0000-8E-N31 Installation Instructions Manual preview
0000-8E-N31
Brand: Mazda Pages: 7
AA Products KX205 Instruction Manual preview
KX205
Brand: AA Products Pages: 8
Maxon 299018-01 Instruction preview
299018-01
Brand: Maxon Pages: 10
Webasto Thermo Top E Installation Documentation preview
Thermo Top E
Brand: Webasto Pages: 28
Panavise Indash 75114-296 Installation Instructions preview
Indash 75114-296
Brand: Panavise Pages: 2

Brands by name

Popular brands

Load more brands