manualshive.com logo in svg

Mitsubishi MOTORS i-MiEV, Owner'S Manual

The Mitsubishi MOTORS i-MiEV electric vehicle is a sustainable and innovative transportation solution. To ensure optimal usage, we provide a comprehensive user manual that can be downloaded for free from our website. Discover all the features and functionalities of the i-MiEV by accessing the manual directly at manualshive.com.

Share
Download
background image

Supplemental Restraint System (SRS) - airbag

Seat and restraint systems

4-31

4

N00419200204

The curtain airbags are contained in the front
pillars and roof side rail. The curtain airbag is
designed to inflate only on the side of the
vehicle that is impacted, even with no passen-
ger in the front seat.

Curtain airbag system 

WARNING

The side airbag and curtain airbag can
cause serious injury or death to anyone
too close to the airbag when it deploys. To
reduce the risk of injury from a deploying
side airbag and curtain airbags, all occu-
pants must be properly restrained and
seated well back, upright, and in the mid-
dle of the seat. Do not lean against the
door.

WARNING

In order to reduce the risk of injury from
a deploying side airbag, do not allow any
rear seat passengers to hold onto the back
of either front seat. Special care should be
taken with children.

Do not place any objects near or around
the front of either front seatback. Such
objects can interfere with proper side air-
bag deployment and cause injury during
deployment of the side airbag.

Do not place stickers, labels or additional
trim on the back of either front seat. They
can interfere with proper side airbag
deployment.

Do not install seat covers or re-cover seats
that have side airbags. Covers can inter-
fere with proper side airbag deployment
and adversely affect side airbag perfor-
mance.

Do not attach a microphone (A) or any
other object around the part where the
curtain airbag (B) deploys, such as on the
windshield, side door glass or front and
rear pillars and roof side rail. When the
curtain airbag inflate, the microphone or
other object may be hurled with great
force or the curtain airbag may not inflate
correctly, resulting in death or serious
injury. 

WARNING

Never install a rear-facing child restraint
system in the front passenger seat. Rear-
facing child restraint systems MUST
ONLY be used in the rear seat.

WARNING

BK0220400US.book  31 ページ  ２０１４年１１月１８日　火曜日　午前７時２７分

Summary of Contents for i-MiEV










































































































































































































































































































Reviews:

No comments

Related manuals for i-MiEV

Federal Signal Corporation 7000 Assembly Instructions Manual preview
7000
Brand: Federal Signal Corporation Pages: 13
Accel 2020 Installation Instructions preview
2020
Brand: Accel Pages: 2
Kuda-Phonebase 055040 Installation Instruction preview
055040
Brand: Kuda-Phonebase Pages: 3
PEUGEOT Partner Origin Handbook preview
Partner Origin
Brand: PEUGEOT Pages: 128
Schumacher Electric SPI6 Owner'S Manual preview
SPI6
Brand: Schumacher Electric Pages: 87
Cadillac 2009 ESCALADE ESV Owner'S Manual preview
2009 ESCALADE ESV
Brand: Cadillac Pages: 602
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
Skoda Fabia Combi 5J Fitting Instructions preview
Fabia Combi 5J
Brand: Skoda Pages: 2
FALCON RIDGE CF-UFORCE-DRW01 Instructions For Installation And Care preview
CF-UFORCE-DRW01
Brand: FALCON RIDGE Pages: 6
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Mitsubishi 3000gt 1999 Workshop Manual preview
3000gt 1999
Brand: Mitsubishi Pages: 57
travall TDG1166 Fitting Instructions preview
TDG1166
Brand: travall Pages: 4
Oldsmobile ALERO 2001 Owner'S Manual preview
ALERO 2001
Brand: Oldsmobile Pages: 340
Whispbar K408W Fitting Instructions Manual preview
K408W
Brand: Whispbar Pages: 15
Saab 900 1983 Owner'S Manual preview
900 1983
Brand: Saab Pages: 64

Brands by name

Popular brands

Load more brands