manualshive.com logo in svg

Mitsubishi MOTORS i-MiEV, Owner'S Manual

The Mitsubishi MOTORS i-MiEV electric vehicle is a sustainable and innovative transportation solution. To ensure optimal usage, we provide a comprehensive user manual that can be downloaded for free from our website. Discover all the features and functionalities of the i-MiEV by accessing the manual directly at manualshive.com.

Share
Download
background image

Towing

For emergencies

8-11

8

Before driving, stow the compressor and
make sure that the rear seat cushion is
properly secured.

20. After driving for 10 minutes or 3 miles (5

km) again, check the tire pressure using
the air pressure gauge on the compressor.
If the tire pressure has apparently not
dropped, the emergency repair procedure
is complete. Before driving, make sure
that the compressor is stowed and the seat
cushion is properly secured. You must
still not exceed a speed of 50 mph (80
km/h). Observe local speed limits.

21. Immediately drive with great care to a

certified i-MiEV dealer and have tire
repair/replacement performed.

N00837001931

If you need to tow your vehicle, contact a cer-
tified i-MiEV dealer or a commercial tow
truck service.
Transport the vehicle on a flatbed truck or
tow the vehicle either with all wheels or the
rear wheels (drive wheels) off the ground.

CAUTION

If the tire pressure is lower than the mini-
mum permitted pressure (18 psi {130 kPa}),
the tire cannot successfully be repaired with
the tire sealant. Do not drive the vehicle any
further. Contact a certified i-MiEV dealer.

NOTE

If the tire pressure has dropped below the
specified level when you check it at the end
of the repair procedure, do not drive the
vehicle any further. Contact a certified i-
MiEV dealer.

In cold conditions (when the ambient tem-
perature is 32 °F {0 °C} or lower), the time
and driving distance necessary until comple-
tion of the repair can become longer than in
warmer conditions, and the tire pressure may
drop below the specified level even after you
have inflated the tire the second time and
subsequently driven the vehicle. If this hap-
pens, inflate the tire to the specified pressure
once more, drive for about 10 minutes or 3
miles (5 km), then check the tire pressure
again. If the tire pressure has again dropped
below the specified level, stop driving the
vehicle and contact a certified i-MiEV
dealer.

NOTE

Please give the empty sealant bottle to a cer-
tified i-MiEV dealer or dispose of the sealant
bottle according to regulations for the dis-
posal of chemical waste.

NOTE

Towing 

If your vehicle needs to be 
towed 

Towing with rear wheels off the ground

Dolly type

Flat bed type

BK0220400US.book  11 ページ  ２０１４年１１月１８日　火曜日　午前７時２７分

Summary of Contents for i-MiEV










































































































































































































































































































Reviews:

No comments

Related manuals for i-MiEV

Jeep Compass Overview Manual preview
Compass
Brand: Jeep Pages: 25
Jeda Wireless Pad Manual preview
Wireless Pad
Brand: Jeda Pages: 8
Jeep 2009 Wrangler Owner'S Manual preview
2009 Wrangler
Brand: Jeep Pages: 496
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
EEZ RV 51 SC Instruction Manual preview
51 SC
Brand: EEZ RV Pages: 31
Connects2 adaptiv mini ADVM-BM1 Fitting & User Manual preview
adaptiv mini ADVM-BM1
Brand: Connects2 Pages: 4
Ecco EC4210B-K Installation And Operation Instructions Manual preview
EC4210B-K
Brand: Ecco Pages: 9
Pyle PLDCP3 User Manual preview
PLDCP3
Brand: Pyle Pages: 2
Hama 00 123530 Operating Instructions preview
00 123530
Brand: Hama Pages: 4
Volvo 1992 850 Service And Repair Manual preview
1992 850
Brand: Volvo Pages: 230
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5
Mercedes-Benz MY17 c-class Operator'S Manual preview
MY17 c-class
Brand: Mercedes-Benz Pages: 354
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
Whispbar WB751 Manual preview
WB751
Brand: Whispbar Pages: 15
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14
Meritor 93000 Service Service Manual preview
93000 Service
Brand: Meritor Pages: 20
Stealthbox SB-J-GCHER2/10W3v2 Installation Manual preview
SB-J-GCHER2/10W3v2
Brand: Stealthbox Pages: 2
Mopar 2005-2009 Chrysler 300C Installation Instructions Manual preview
2005-2009 Chrysler 300C
Brand: Mopar Pages: 7

Brands by name

Popular brands

Load more brands