Mitsubishi MOTORS i-MiEV Owner'S Manual Download Page 273

Page: 273 / 297

Replacement of light bulbs

9-26

Vehicle care and maintenance

5. Pull the bulb out of the socket.

6. To install the bulb, perform the removal

steps in reverse.

N00935400108

1. Remove the clips (A), then lift the cover

(B).

2. Turn the socket (C) counterclockwise to

remove it.

3. Pull the bulb out of the socket.

4. To install the bulb, perform the removal

steps in reverse.

N00943900128

1. Remove the mounting screws (A) and

remove the light unit.

C- Tail and stop light (LED) - cannot be

replaced

D- Rear turn signal light

E- Back up light

NOTE



The tail and stop lights use LEDs rather than
bulbs.
For repair and replacement, contact a certi-
fied i-MiEV dealer.

Rear side-marker lights

High-mounted stop light

BK0220400US.book 26 ページ２０１４年１１月１８日　火曜日　午前７時２７分

Summary of Contents for i-MiEV










































































































































































































































































































Search results

Summary of Contents for i-MiEV

Reviews:

Related manuals for i-MiEV

Brands by name

Popular brands

Mitsubishi MOTORS i-MiEV, Owner'S Manual

Search results

Summary of Contents for i-MiEV

Reviews:

Related manuals for i-MiEV

Brands by name

Popular brands