background image

Hazard warning flasher switch

Features and controls

5-49

5

N00522700305

If you press the flasher switch, the front and
rear turn signals will flash intermittently, and
so will the hazard warning lights. This is an
emergency warning system and should not be
used when the vehicle is in motion, except for
emergencies.
If you need to leave your vehicle, the flashers
will keep working after the key is removed
from the electric motor switch.

N00522801433

The front fog lights illuminate only when the
headlights are on low beam.
Turning the knob in the direction of the “ON”
position turns on the front fog lights as well
as the indicator in the instrument cluster. To
turn them off, turn the knob in the direction of
the “OFF” position.
The knob will return to the neutral position
when it is released.

NOTE

A light in the instrument panel flashes to
show when the front and rear turn signal
lights are working properly.
If this light flashes faster than usual, check
for a burned out light bulb or malfunctioning
connection.
If the panel light does not come on when the
lever is moved, check for a blown fuse or a
burned out bulb in the panel.
Have the vehicle inspected by a certified i-
MiEV dealer.

It is possible to modify functions as follows:
• Deactivate the turn signal light 3-flash

function for lane changes.

• Adjust the time required to operate the

lever for the 3-flash function.

See a certified i-MiEV dealer for details.

Hazard warning flasher 
switch 

NOTE

If you keep the flashers on for a long period
of time while the ready indicator is not illu-
minated, the 12V starter battery could go flat
and the electric motor unit could be impossi-
ble to start.

Front fog light switch 

NOTE

If the headlights are switched to high beam,
the front fog lights will go out; they will illu-
minate again when the headlights are
switched back to low beam.

BK0220400US.book  49 ページ  2014年11月18日 火曜日 午前7時27分

Summary of Contents for i-MiEV










































































































































































































































































































Reviews: