Mitsubishi MOTORS i-MiEV, Owner'S Manual

Page: 65 / 297

MiEV Remote System
3-50 General information/Charging
3
N01204600016
N01204700017
Two coin type batteries are used. Replace as
necessary to assure proper operation.
N01204800021
1. Before replacing the batteries, remove
static electricity from your body by touch-
ing a metal grounded object.
2. Battery cover (B) lifts when the slide por-
tion (A) is moved to the arrow direction.
3. By moving the battery cover (B) in the
arrow direction, tabs (C) on the battery
cover will come out and the battery cover
can be removed.
4. Remove the old batteries.
5. Install two new coin type CR2032 batter-
ies (D) with the “+” side up.
6. Attach the battery cover (A) in the reverse
order from the way you have detached it.
7. Confirm the MiEV Remote can be turned
ON. Refer to “To turn the MiEV Remote
ON/OFF” on page 3-42.
Replacement of batteries for
the MiEV Remote
CAUTION
 MiEV Remote is a precision electronic
device with a built-in signal transmitter. Do
not disassemble or touch an internal parts.
Keep away from water or dust.
 Be careful not to break the tab on the battery
cover when removing or installing the bat-
tery cover.
About battery
NOTE
 Standard battery life on the MiEV Remote is
about 1 year. Battery life can vary depending
on environmental and usage conditions.
To replace the batteries
NOTE

Replace both batteries with new ones at the
same time.
 A certified i-MiEV dealer can replace the
batteries for you if you prefer.
Coin type batteries
CR2032
BK0220400US.book 50 ページ ２０１４年１１月１８日 火曜日 午前７時２７分