Mitsubishi MOTORS i-MiEV, Owner'S Manual

Page: 171 / 297

Bluetooth® 2.0 interface (if so equipped)
5-62 Features and controls
5
5. After the voice guide says “Please say,”
the numbers of the devices and device
tags of corresponding devices will be read
out in order, starting with the device that
has been most recently connected. After it
completes reading all pairs, the voice
guide will say “or all.”
Say the number of the device that you
want to delete from the system.
If you want to delete all paired phones
from the system, say “All.”
6. For confirmation purposes, the voice
guide will say “Deleting <device tag>
<number>. Is this correct?” or “Deleting
all devices. Is this correct?”
Answer “Yes” to delete the phone(s).
Answer “No,” the system will return to
Step 4.
7. The voice guide will say “Deleted,” and
then the system will end the device dele-
tion process.
N00565201065
You can check a paired Bluetooth
®
device by
following the steps below.
1. Press the PICK-UP button.
2. Say “Setup.”
3. Say “Pairing Options.”
4. The voice guide will say “Select one of
the following: pair, edit, delete, or list.”
Say “List.”
5. The voice guide will read out device tags
of corresponding devices in order, starting
with the Bluetooth
®
device that has been
most recently connected.
6. After the device tags of all paired Blue-
tooth
®
devices have been read, the system
will say “End of list, would you like to
start from the beginning?”
To hear the list again from the beginning,
answer “Yes.”
When you are done, answer “No” to
return to the main menu.
N00565301066
You can change the device tag of a paired cel-
lular phone or music player.
Follow the steps below to change a device
tag.
1. Press the PICK-UP button.
2. Say “Setup.”
3. Say “Pairing Options.”
NOTE
 If the device deletion process fails for some
reason, the voice guide will say “Delete
failed” and then the system will cancel delet-
ing the device.
To check a paired Bluetooth
®
device
NOTE
 If you press and release the SPEECH button
and say “Continue” or “Previous” while the
list is being read, the system will advance or
rewind the list.
Say “Continue” to proceed to the device with
the next highest number or “Previous” to
return to the phone with the previous num-
ber.
 You can change the device tag by pressing
and releasing the SPEECH button and then
saying “Edit” while the list is being read.
 You can change the phone to be connected
by pressing and releasing the SPEECH but-
ton and then saying “Select phone” while the
list is being read.
 You can change the music player to be con-
nected by pressing and releasing the
SPEECH button and then saying “Select
music player” while the list is being read.
Changing a device tag
BK0220400US.book 62 ページ ２０１４年１１月１８日 火曜日 午前７時２７分