Mitsubishi MOTORS i-MiEV, Owner'S Manual

Page: 80 / 297

Head restraints
Seat and restraint systems 4-7
4
To reduce the risk of injury in an accident,
adjust the head restraint height so that the
center of the restraint is at your eye level
when seated. Any person too tall for the
restraint to reach their eye level when seated
should raise the restraint to the highest locked
position.

To raise the restraint, pull it straight up.
 To lower the restraint, push down on it
while pressing the lock knob (A) in the
direction shown by the arrow.

After adjusting the height, push down on
the restraint to make sure it is locked in
position.
Press the lock knob (A) in the direction
shown by the arrows. Then pull the head
restraint up and out of the seatback.
First check that the head restraint is facing in
the right direction as shown in the previous
illustration, and then insert it into the seat-
back. Push the head restraint down while
pressing the lock knob (A) until the restraint
locks into place.
 Driving without the head restraints in
place can cause you and your passengers
serious injury or death in an accident. To
reduce the risk of injury in an accident,
always make sure the head restraints are
installed and properly positioned when
the seat is occupied.
 Never place a cushion or similar device on
the seatback. This can adversely affect
head restraint performance by increasing
the distance between your head and the
restraint.
Adjustment of the head
restraint height
WARNING
To remove
WARNING
 To help minimize the risk of neck injury in
the event of an accident, the head
restraints must be properly installed and
positioned to proper height before vehicle
operation.
To install
CAUTION
 Check that the lock knob (A) is extended out
as shown in the illustration. Then pull the
head restraint up to make sure that it is
locked in place and will not come out of the
seatback.
BK0220400US.book 7 ページ ２０１４年１１月１８日 火曜日 午前７時２７分