Mitsubishi Heavy Industries FDCW100VNX-A, Technical Manual

Page: 162 / 315

Control
'19 • HM-T-340
Schedule:
The period to be changed is selected here.
Activated:
Scheduling for the selected period is activated
here. Set times are not aff ected at deactivation.
Day:
Select which day or days of the week the schedule is to
apply to here. To remove the scheduling for a particular day,
the time for that day must be reset by setting the start time to
the same as the stop time. If the line "all" is used, all days in
the period are set for these times.
Time period:
The start and stop time for the selected day for
scheduling are selected here.
Conflict:
If two settings conflict with each other a red
exclamation mark is displayed.
TIP
If you wish to set similar scheduling for every day of the
week start by filling in “all” and then changing the desired
days.
TIP
Set the stop time earlier than the start time so that the
period extends beyond midnight. Scheduling then stops at
the set stop time the day after.
Scheduling always starts on the date that the start time is
set for.
CAUTION
Long term scheduling of "silent mode" can cause reduced
comfort and operating economy.
Control
- 160 -