Mitsubishi Heavy Industries FDCW100VNX-A, Technical Manual

Page: 140 / 315

Control
'19 • HM-T-340
RC-HY20/40
-W
– at your service
Set the indoor climate
Overview
Sub-menus
temperature
INDOOR CLIMATE 1
advanced
scheduling off
For the menu "INDOOR CLIMATE" there are several sub-
menus. Status information for the relevant menu can be found
on the display to the right of the menus.
"
temperature
" Setting the temperature for the climate
system. The status information shows the set values for the
climate system.
"
scheduling
" Scheduling heating and cooling. Status
information "set" is displayed if you set a schedule but it is not
active now, "holiday setting" is displayed if the vacation
schedule is active at the same time as the schedule (the
vacation function is prioritised), "active" displays if any part of
the schedule is active, otherwise it displays " off ".
"
advanced
" Setting of heat curve, adjusting with external
contact, minimum value for supply temperature, room sensor
and cooling function.
Menu 1.1 - temperature
If the house has several climate systems, this is indicated on
the display by a thermometer for each system.
Choose heating or cooling and then set the desired temperature
in the next menu "temperature heating/cooling" in menu 1.1.
Set the temperature (with room sensors installed and
activated):
temperature heating 1.1.1
temperature cooling 1.1.2
heating
Setting range: 5 – 30 °C
Default value: 20
cooling (accessory is required)
Setting range: 5 – 30 °C
Default value: 25
The value in the display appears as a temperature in °C if the
climate system is controlled by a room sensor.
CAUTION
A slow heat-releasing heating system, such as for example,
underfloor heating, may not be suitable for control using the
heat pump's room sensor.
To change the room temperature, use the control knob to set
the desired temperature in the display. Confi rm the new setting
by pressing the OK button. The new temperature is shown on
the right-hand side of the symbol in the display.
Setting the temperature (without room sensors
activated):
Setting range: -10 to +10
Default value: 0
The display shows the set values for heating (curve off set). To
increase or reduce the indoor temperature, increase or reduce
the value on the display.
Use the control knob to set a new value. Confirm the new
setting by pressing the OK button.
Control
"
scheduling
" Scheduling heating and cooling. Status information
"set" is displayed if you set a schedule but it is not active now,
"holiday setting" is displayed if the vacation schedule is active at the
same time as the schedule (the vacation function is prioritised),
"active" displays if any part of the schedule is active, otherwise it
displays " off ".
"
advanced
" Setting of heat curve, adjusting with external contact,
minimum value for supply temperature, room sensor and cooling
function.
- 138 -
#