Mitsubishi Heavy Industries FDCW100VNX-A, Technical Manual

Page: 118 / 315

Installation
'19 • HM-T-340
Start guide
NOTE
Fill in the climate system with water before the switch is set
to " "
1. Set the control module's switch to " ".
2. Follow the instructions in the start guide in the control
module display. If the start guide does not start when you
start the control module, start it manually in menu 5.7.
TIP
See “control” for a more in-depth introduction to the
installation’s control system (operation, menus etc.).
Commissioning
The start guide is displayed when installation is started, It
describes what needs to carry out at the fi rst start together with
basic settings during installation.
The start guide is displayed so that it cannot be bypassed in
order to carry out the start-up correctly. You can start the start
guide later in menu 5.7.
During the start-up guide, reversing valves and the shunt are
run back and forth to help vent the heat pump.
CAUTION
As long as the start guide is active, no function in the heat
pump will start automatically.
Each time the controller is ON, the guide will appear until it
is completed on the last page.
Operation in the start guide
language 4.6
If the start guide is left on this page it closes
automatically in
60 min
A.
Page
C.
Option / setting
B.
Name and menu number
A. Page
You can see the current page of the start guide.
Scroll between the pages of the start guide as follows:
p o t e h t n i d e k r a m s i w o rr a e h t li t n u b o n k l o rt n o c e h t n r u T . 1
left corner (at the page number).
tr a t s e h t n i e g a p t x e n e h t o t d e e c o r p o t n o tt u b K O s s e r P . 2
guide.
B. Name and menu number
You can see the menu name of this page. The number refers to
the menu number in the control system.
To read more about aff ected menus, see the help menu or read
the user manual.
C. Option / setting
Make settings for the system here.
D. Help menu
p l e h a rt x e t a h t g n it a c i d n i l o b m y s a s i e r e h t s u n e m y n a m n I
is available.
To access the help text:
1. Use the control knob to select the help symbol.
2. Press OK button.
The help text often consists of several windows that you can
scroll between using the control knob.
Indoor unit installation
- 116 -