Mitsubishi Electric CC-Link IE-NZ2GNSS2-16DTE, User Manual

Page: 59 / 170

7 SETTINGS
7.2 Parameter Setting
57
7
7.2
Parameter Setting
Parameter setting of the safety remote I/O module can be done with the following methods.
• Slave station parameter automatic setting (

Page 59 Slave station parameter automatic setting)
• Parameter processing of slave station (

Page 62 Parameter processing of slave station)
Even if the safety remote I/O module is replaced due to a failure of the safety remote I/O module when parameters are set
with slave station parameter automatic setting, the parameters of the safety remote I/O module are automatically set via the
master station.
This saves one the trouble of having to newly set parameters.
Window
Setting item list
Item Setting details Setting range Reference
Station parameter Safety setting Transmission interval
monitoring time Set the transmission interval
monitoring time for safety data. 4 to 1000(ms) Page 143 Transmission
interval monitoring time
I/O LED indication
setting at error
occurrence Set whether the input and output
points where an error is detected
is indicated with an LED. 0: No indication of error
point
1: Indication of error
point Page 143 I/O LED
indication setting at
error occurrence
Safety approval code Set a safety approval code that
identifies the individual safety
remote I/O module. 0x00000000 to
0xFFFFFFFF Page 144 Safety
approval code
Link speed setting Set a communication speed with
which the safety remote I/O
module links up. 0: 1Gbps
1: 100Mbps
2: automatic Page 144
Communication speed
setting