Mitsubishi Electric CC-Link IE-NZ2GNSS2-16DTE, User Manual

Page: 36 / 170

34
5 SYSTEM CONFIGURATION
5.1 Applicable Systems
5
SYSTEM CONFIGURATION
This chapter describes the safety system configuration using a safety remote I/O module.
For details on the CC-Link IE TSN configuration, refer to the following.

User's manual for the master station used
5.1
Applicable Systems
Applicable products
When using a safety remote I/O module, use the following products.
For model names of the Safety CPU and the safety function module, refer to the following.

MELSEC iQ-R Module Configuration Manual
The above information on "master station" is the one at the time of this manual's issuance.
For the latest information, refer to the CC-Link Partner Association's website.
www.cc-link.org
CPU modules other than Safety CPUs cannot be used with the safety remote I/O module.
Compatible software version
For the compatible software version, always keep the engineering tool of the master station up to date.
Only GX Works3 is a compatible engineering tool.
When the latest software is necessary, please consult your local Mitsubishi representative.
Compatible software package
Settings or diagnostics of the safety remote I/O module require the following engineering tool.
Model Firmware version
Safety CPU "20" or later
Safety function module "20" or later
Master station (RJ71GN11-T2) "10" or later
Master station (RD78GHV, RD78GHW, RD78G64, RD78G32, RD78G16,
RD78G8, RD78G4) "08" or later
Product name Software version
GX Works3 Version 1.065T or later