Handling Calls
cxliii
Indication of Transferred Calls
When you transfer an active call, the near-end phone displays a
Call Transferred
screen when a
call is transferred and the far-end call is dropped. The figure below illustrates the
Call Transferred
screen on the 6930 phone.
Conferencing Calls
You can use the
Conf
softkey offered on screen when in a connected call to create conference calls
or use a softkey configured with Conference functionality (see “Conference Key” on page cxvi).
Local Conferencing
The 6930 phone supports up to three parties (including yourself) in a conference call. This is called
local conferencing and is the default method of conferencing on the 6930.
Creating a Conference Call Using Local Conferencing
Use the following procedure to create a conference call using local conferencing.
1.
When you begin a conference, you are the first party in the conference (Party 1). Pickup the
handset or press the
key. A line opens up.
2.
Call Party 2 by dialing their number (or answer an incoming call of a party).
3.
Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding
them to the conference.
Note:
Your System Administrator can set your
Conference
key to speed dial a specific
number. Contact your System Administrator for more information.
Summary of Contents for MiVOICE 6930
Page 1: ...Mitel 6930 SIP Phone 58015330 REV00 RELEASE 5 0 0 USER GUIDE ...
Page 10: ...Table of Contents xi ...
Page 211: ......
