Mitel MiVOICE 6930, User Manual

Page: 84 / 211

Configuring Softkeys
lxxxv
State-Based Softkeys
On the 6930’s bottom softkeys, you can configure a specific state to display when a softkey is being
used. The following table describes the states available to configure for the softkeys.
The following table identifies the applicable default states for each softkey type on the IP phone.
Paging Indicates the key is configured as a Paging key. When pressed, the phone can
send Real Time Transport Protocol (RTP) streams from a pre-configured
multicast address without involving SIP signaling.
Login Indicates the key is configured as a Visitor Desk Phone (VDP) Login key. For
VDP feature availability and details, please contact your System Administrator.
Mobile Indicates the key is configured as a Mobile key. When pressed, an incoming
mobile call can be answered using the Mitel 6930 SIP IP phone and also switch
the mobile call audio between the 6930 IP phone and mobile phone,
Discreet Ringing Indicates the key is configured as a Discreet Ringing key. When the Discreet
Ringing feature is enabled, if a call is incoming, the phone will play the
configured ring tone once only. Pressing the Discreet key will allow you to toggle
on/off the feature.
Call History Indicates the key is configured as a Call History key. When pressed, the Call
History softkey allows users the ability to directly access the list of all calls in the
Call History.
Empty Indicates the key has no function assigned but should be displayed as any
empty softkey on the phone’s screen.
Note:
Keys can also be set up to quickly to access features such as call return (*69) or
voicemail. Quick access features like call return and voicemail must first be configured
on your PBX in order to work on your phone. See your System Administrator for more
information.
State Description
Idle The phone is not being used.
Connected The current line is in an active call (or the call is on hold).
Incoming The phone is ringing.
Outgoing The user is dialing a number, or the far-end is ringing.
Busy The current line is busy because the line is in use or the line is set as DND.
Softkey Type Default States
None All states disabled.
Speed Dial Idle, Connected, Incoming, Outgoing, Busy
DND Idle, Connected, Incoming, Outgoing, Busy
XML Idle, Connected, Incoming, Outgoing, Busy
Flash All states disabled.
Sprecode Connected
Key Function Description