Mitel MiVOICE 6930 User Manual Download

Page: 47 / 211

Mitel 6930 SIP Phone User Guide

xlviii

•

Русский

(Russian)

•

Nordic

•

ελληνικά

(Greek)

Press the

Save

softkey to save your changes.

The change is dynamic. The phone and the Mitel Web UI allow you to enter text and characters
in the language you selected.

Specifying the Input Language Using the Mitel Web UI

Click on

Basic Settings > Preferences > Language Settings.

Select a language from the

Input Language

field. Setting this field allows you to specify the

language to use when entering text and characters in the Mitel Web UI and IP phone UI. Valid
values are:

•

English (default)

•

Français (French)

•

Español (Spanish)

•

Deutsch (German)

•

Italiano (Italian)

•

Português (Portuguese)

•

Русский

(Russian)

•

Nordic

•

ελληνικά

(Greek)

Click

Save Settings

The change is dynamic. The phone and the Mitel Web UI allow you to enter text and characters
in the language you selected.

Latin 2 Character Set

The 6930 includes support for ISO 8859-2 (Latin2) of multi-national languages when displaying and
inputting in the IP phone UI and the Mitel Web UI. UTF-8 is also compatible with XML encoding on
the IP phones.

Note:

Available input languages are dependent on the configuration enabled by your

System Administrator

Note:

All languages may not be available for selection. The available input languages

are dependent on the configuration enabled by your System Administrator.

Summary of Contents for MiVOICE 6930




















































































































































































































Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands

Mitel MiVOICE 6930, User Manual

Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands