manualshive.com logo in svg

Mitel MiVOICE 6930, User Manual

Share
Download
Mitel MiVOICE 6930 User Manual Download Page 130

Making Calls

cxxxi

On the 6930, you access the Outgoing Redial List by the 

 

key.

The following table identifies and describes the various icons displayed in the Outgoing Redial List.

Icon

Description

Indicates an outgoing call that was answered.

Call Feature Indicators (in detailed view only)

Indicates the call was secured using TLS/SRTP encryption.

Indicates the call was using Mitel Hi-Q™ audio.

Indicates active VoIP recording was enabled and the call was recorded.

Notes: 

1.

When the Outgoing Redial List is full, the oldest call records are deleted to 

accommodate the information of new called parties.

2.

If the telephone number of an incoming or outgoing call matches a number that you 

have programmed with a name in a softkey or the Directory, the Outgoing Redial 
List display the same name and number.

3.

For details on the total number of Outgoing Redial List entries currently stored on 

your phone, see 

“Phone Status through IP Phone UI”

 on 

page xxxv

.

Outgoing

Redial Key

Summary of Contents for MiVOICE 6930




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands