Mitel MiVOICE 6930 User Manual Download

Page: 78 / 211

Customizing Your Phone

lxxix

Setting the Brightness Level and Timer Using the IP Phone UI

Press

on the phone to enter the Options List.

Navigate to the

Display

option and press the select button or

Select

softkey.

Press the down navigation key twice to highlight

Brightness Level

Use the left and right navigation buttons to increase or decrease the intensity of brightness on
the LCD.

Press the down navigation key to highlight

Brightness Timer

Enter a value, in seconds, using the dialpad keys. You can set the timer from 1 to 36000 seconds.
Default is 600 (10 minutes).

Press the

Save

softkey

to save your changes.

Dialing

Live Dialpad

The

Live Dialpad

option on the IP phone turns the live dialpad mode on or off. With the live dialpad

feature enabled, the 6930 IP phone automatically dials out and turns on handsfree mode as soon
as a dialpad key or softkey is pressed. With live dialpad disabled, if you dial a number while the
phone is on-hook, lifting the receiver or pressing the

initiates a call to that number.

You can enable/disable the live dialpad using the IP phone UI only.

Enabling/Disabling Live Dialpad Using the IP Phone UI

Press

on the phone to enter the Options List.

Note:

Availability of this feature is dependent on your phone system or service provider.

Summary of Contents for MiVOICE 6930




















































































































































































































Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands

Mitel MiVOICE 6930, User Manual

Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands