Mitel MiVOICE 6930 User Manual Download

Page: 65 / 211

Mitel 6930 SIP Phone User Guide

lxvi

Navigate to the

Bluetooth

setting and press the

Select

button or

Select

softkey.

Ensure Bluetooth functionality is enabled. If it is not enabled, press the

Turn On

softkey to

enable Bluetooth functionality

Press the right navigation key to move to the paired Bluetooth device selection column.

Using the up and down navigation keys, highlight the Bluetooth device you want to forget and
press the

Forget

softkey.

A confirmation message displays on screen.

Press

Yes

to forget the Bluetooth device.

The Bluetooth device is removed from the list of

Paired Devices

Summary of Contents for MiVOICE 6930




















































































































































































































Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands

Mitel MiVOICE 6930, User Manual

Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands