Mitel MiVOICE 6930 User Manual Download

Page: 107 / 211

Mitel 6930 SIP Phone User Guide

cviii

In the

Value

field, enter the monitored extension or the extension to transfer calls to (for example,

3500).

In the

Line

field, select the line for which you want to use the key functionality.

Valid values are:

•

global

•

through

10.

Click

Save Settings

Speed Dial/Xfer

The

Speed Dial

key allows a number to be dialed quickly by pressing one key configured for speed

dialing. The

Transfer

key allows a call to be transferred to other recipients blindly or consultatively.

The

Speed Dial/Xfer

key combines the

Speed Dial

and

Transfer

keys’ functionality together

allowing the user to transfer calls or speed dial with one key.

Speed Dial/Xfer Key Requirements and Functionality

The

Speed Dial/Xfer

key has the following capabilities:

•

Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the

Speed

Dial/Xfer

key causes the phone to go offhook and dial the predefined extension.

•

Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the

Speed

Dial/Xfer

key blind transfers the call to the predefined target.

If transferring a call fails, a message

Transfer Failed

displays, and you can reconnect the call (get

the call back) by pressing the line key again.

•

Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the

Speed

Dial/Xfer

key forwards the call to the predefined extension.

Configuring a Speed Dial/Xfer Key Using the Mitel Web UI

Click on

Operation > Softkeys and XML

or
Click on

Operation > Expansion Module <N>.

Note:

It is recommended that you enable the

Switch UI Focus to Ringing Line

parameter when using the Speed Dial/Xfer feature. For more information about this
parameter, see

“Switch UI Focus to Ringing Line”

page clxxxviii

Summary of Contents for MiVOICE 6930




















































































































































































































Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands

Mitel MiVOICE 6930, User Manual

Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands