manualshive.com logo in svg

Mitel MiVOICE 6930, User Manual

Share
Download
Mitel MiVOICE 6930 User Manual Download Page 49

Mitel 6930 SIP Phone User Guide

l

2.

Navigate to the 

Time and Date > Settings 

option and press the select button or 

Select

 softkey.

3.

With 

Time Format

 highlighted press the right navigation key to move to selection column.

4.

Use the up and down navigation keys to scroll through and choose the desired time format. 
Valid values are 12 Hour and 24 Hour (the default is 12 Hour).

5.

Press the left navigation key to move back to the options column and press the down navigation 
key to highlight 

Daylight Savings

.

6.

With 

Daylight Savings 

highlighted press the right navigation key to move to selection column.

7.

Use the up and down navigation keys to scroll through and choose the desired daylight savings 
setting. Valid values are:

•

Off

•

30 min summertime

•

1h summertime

•

Automatic (default)

Summary of Contents for MiVOICE 6930




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands