manualshive.com logo in svg

Mitel MiVOICE 6930, User Manual

The Mitel MiVOICE 6930 is a feature-rich, user-friendly communication device designed to enhance your business communication experience. Seamlessly navigate its functions and maximize efficiency with the Quick Reference Manual, available for free download at manualshive.com. Gain access to valuable insights and unleash the full potential of your Mitel MiVOICE 6930.

Share
Download
background image

Mitel 6930 SIP Phone User Guide

cxlviii

General Directory Functions

Accessing and Navigating the Directory (No External Directory Sources 
Configured/Enabled)

1.

Press the 

 (

Directory

) key or softkey configured with Directory functionality. If no external 

Directory sources are configured or enabled, the local Directory is displayed as per the following 
image.

2.

You can view entry details by pressing the up and down navigation keys to scroll through the list.

3.

From the number selection column, press the right navigation key or the 

Details

 softkey to 

display the contact’s details screen.

You can use the up and down navigation keys to scroll through the list of numbers or press the 

4

 navigation key to move to the address column and scroll through the contact’s addresses 

using the up and down navigation keys.

4.

Press the softkey configured with Directory functionality, 

 

key, or 

Quit

 softkey to exit.

Note: 

If the Directory is empty, a 

Directory empty 

message displays. 

Summary of Contents for MiVOICE 6930




















































































































































































































Reviews:

No comments

Related manuals for MiVOICE 6930

DayTronic System 10 User Manual Book preview
System 10
Brand: DayTronic Pages: 414
Hanwell MS1000 Installation Manual preview
MS1000
Brand: Hanwell Pages: 34
HydroQuip BALBOA CS6000B Series Operation Manual preview
BALBOA CS6000B Series
Brand: HydroQuip Pages: 32
Teac GF-650 Service Manual preview
GF-650
Brand: Teac Pages: 23
Coby COBY CX-CD282 Operating Instructions preview
COBY CX-CD282
Brand: Coby Pages: 3
Cobolt TC1290MS Instruction Manual preview
TC1290MS
Brand: Cobolt Pages: 5
Bose Videobar VB1 Quick Start Manual preview
Videobar VB1
Brand: Bose Pages: 2
Saltillo NOVA chat 5 Quick Reference Manual preview
NOVA chat 5
Brand: Saltillo Pages: 2
AMS CT500 DAB Owner'S Manual preview
CT500 DAB
Brand: AMS Pages: 14
SoundMax SM- MSD11 Instruction Manual preview
SM- MSD11
Brand: SoundMax Pages: 43
Mantracourt T24-RM1 User Manual preview
T24-RM1
Brand: Mantracourt Pages: 24
Barco R9861580US Installation Manual preview
R9861580US
Brand: Barco Pages: 124
Fun Generation Satmix 2.1 PA system User Manual preview
Satmix 2.1 PA system
Brand: Fun Generation Pages: 32
Roadstar CD-810BT Instruction Manual preview
CD-810BT
Brand: Roadstar Pages: 16
Cisco TelePresence MCU 4505 Datasheet preview
TelePresence MCU 4505
Brand: Cisco Pages: 7
Cisco TelePresence MCU 4203 Datasheet preview
TelePresence MCU 4203
Brand: Cisco Pages: 6
Cisco TelePresence MX300 Manual preview
TelePresence MX300
Brand: Cisco Pages: 2
JL Audio Stealthbox SB-D-DRNGO/10W0 Installation Manual preview
Stealthbox SB-D-DRNGO/10W0
Brand: JL Audio Pages: 3

Brands by name

Popular brands

Load more brands