Mitel MiVOICE 6930 User Manual Download Page 32

Page: 32 / 211

Methods of Customizing Your Phone

xxxiii

Operation

User Password

- Allows you to change the user password.

Phone Lock

- Allows you to assign an emergency dial plan to the phone, lock the

phone to prevent any changes to the phone and to prevent use of the phone, as well
as reset the user password.

Softkeys and XML

- Allows you to configure up to 12 top softkeys and 5 bottom

softkeys with functions identified in the list below.

Available functions for softkeys:

Keypad Speed Dial

- Allows you to assign a speed dial number to a specific digit on

the phone’s keypad/dialpad for speed dialing purposes.

Expansion Module

- Allows you to configure an additional 16 softkeys with an M680i

Expansion Module or an additional 84 softkeys with an M685i Expansion Module if it is
attached to the phone. This option displays on the side menu of the Mitel Web UI only
if an Expansion Module is attached.

Directory

- Allows you to copy the Received Callers List and Local Directory from your

IP phone to your PC.

Reset

- Allows you to restart the IP phone when required.

Category

Description

• None

• Speed Dial/Conf

• Line

• Speed Dial/MWI

• Speed Dial

• Directory

• Do Not Disturb (DND)

• Filter

• Busy Lamp Field (BLF)

• Callers List

• BLF/List

• Redial

• Auto Call Distribution (ACD)

• Conference

• Extensible Markup Language (XML)

• Transfer

• Flash

• Intercom (Icom)

• Sprecode

• Phone Lock

• Park

• Paging

• Pickup

• Login

• Last Call Return

• Discreet Ringing

• Call Forward

• Call History

• BLF/Xfer

• Empty

• Speed Dial/Xfer

Summary of Contents for MiVOICE 6930




















































































































































































































Search results

Summary of Contents for MiVOICE 6930

Reviews:

Brands by name

Popular brands

Mitel MiVOICE 6930, User Manual

Search results

Summary of Contents for MiVOICE 6930

Reviews:

Brands by name

Popular brands