Mitel MiVOICE 6930 User Manual Download

Page: 94 / 211

Configuring Softkeys

xcv

The

Mobile Line

key icon changes to reflect the status of the line as per the following table.

Configuring a Mobile Key

Using the Mitel Web UI

Click on

Operation > Softkeys and XML

or
Click on

Operation > Expansion Module <N>

Softkeys

Select from

Key 1

through

Key 44

on the Top keys.

In the

Type

field, select

Mobile

to apply to the key.

In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.

Expansion Module Keys

Select from

Key 1

through

Key 84

(M695).

In the

Type

field, select

Mobile

to apply to the key.

Click

Save Settings

For more information on how to use the

Mobile Line

key, see

“MobileLink”

page clxxvii.

Icon

Description

Indicates the mobile line is connected with a mobile phone and is idle.

(Blinking) Indicates the mobile line is ringing due to an incoming call on your mobile
phone.

Indicates the mobile line is busy.

(Blinking) Indicates an ongoing call with active audio on the mobile phone.

(Blinking) Indicates the call on the mobile line is on hold.

Indicates the mobile phone is not connected.

Summary of Contents for MiVOICE 6930




















































































































































































































Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands

Mitel MiVOICE 6930, User Manual

Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands