manualshive.com logo in svg

Mitel MiVOICE 6930, User Manual

The Mitel MiVOICE 6930 is a feature-rich, user-friendly communication device designed to enhance your business communication experience. Seamlessly navigate its functions and maximize efficiency with the Quick Reference Manual, available for free download at manualshive.com. Gain access to valuable insights and unleash the full potential of your Mitel MiVOICE 6930.

Share
Download
background image

Mitel 6930 SIP Phone User Guide

clx

On the 6930, you access the Received Callers List by the 

 

key.

The following table identifies and describes the various icons displayed in the Received Callers List.

Icon

Description

Indicates an incoming call.

Indicates an incoming call that was not answered.

Call Feature Indicators (in detailed view only)

Indicates the call was secured using TLS/SRTP encryption.

Indicates the call was using Mitel Hi-Q™ audio.

Indicates active VoIP recording was enabled and the call was recorded.

Notes: 

1.

When the Received Callers List is full, the oldest call records are deleted to 

accommodate the information of new callers.

2.

If the telephone number of an incoming or outgoing call matches a number that you 

have programmed with a name in a softkey or the Directory, the Received Callers 
List display the same name and number.

3.

For details on the total number of Received Callers List entries currently stored on 

your phone, see 

“Phone Status through IP Phone UI”

 on 

page xxxv

.

Received

Callers List Key

Summary of Contents for MiVOICE 6930




















































































































































































































Reviews:

No comments

Related manuals for MiVOICE 6930

Samsung MX-F870 Service Manual preview
MX-F870
Brand: Samsung Pages: 70
Samsung MM-L7 Manual Del Usuario preview
MM-L7
Brand: Samsung Pages: 21
Samsung MM-ZB9 Service Manual preview
MM-ZB9
Brand: Samsung Pages: 28
HAMTRONICS T301 Installation Operation & Maintenance preview
T301
Brand: HAMTRONICS Pages: 8
Magnavox AZ8350 - Cd Radio Cass Recorder Operating Instructions Manual preview
AZ8350 - Cd Radio Cass Recorder
Brand: Magnavox Pages: 18
Teac CD-X9 Owner'S Manual preview
CD-X9
Brand: Teac Pages: 24
TeachLogic Maxim III Installation Manual preview
Maxim III
Brand: TeachLogic Pages: 21
SMA SB3.0-1SP-US-40 Service Manual preview
SB3.0-1SP-US-40
Brand: SMA Pages: 17
elsner elektronik 60121 Installation & Operation Manual preview
60121
Brand: elsner elektronik Pages: 148
Delco ETR 2000 series User Manual preview
ETR 2000 series
Brand: Delco Pages: 34
Prology MCE-525UR Service Manual preview
MCE-525UR
Brand: Prology Pages: 37
Idemia MorphoWave SP Installation Manual preview
MorphoWave SP
Brand: Idemia Pages: 74
Instron Torsion Add-on Version 3 Operator'S Manual preview
Torsion Add-on Version 3
Brand: Instron Pages: 32
Polycom CX 200 Quick Start Manual preview
CX 200
Brand: Polycom Pages: 4
Alpine KTX-TCMS-5 Installation Kit preview
KTX-TCMS-5
Brand: Alpine Pages: 8
Sven SPS-818 Operation Manual preview
SPS-818
Brand: Sven Pages: 12
MPMan XRM 33 Manual preview
XRM 33
Brand: MPMan Pages: 5
Chrosziel MagNum MN-100 Quick Reference Manual preview
MagNum MN-100
Brand: Chrosziel Pages: 2

Brands by name

Popular brands

Load more brands