Mitel 6930 SIP Phone User Guide
cxcii
Configuring Call Waiting Tone Period
1.
Click on
Basic Settings > Preferences > General
2.
In the
Call Waiting Tone Period
field, enter a time period, in seconds, that the call waiting tone
will be audible on an active call when another call comes in. Default is 0 seconds.
When enabled, the call waiting tone plays at regular intervals for the amount of time set for this
parameter. For example, if set to 30 the call waiting tone plays every 30 seconds. When set to
0, the call waiting tone is audible only once on the active call.
3.
Click
Save Settings
.
Preferred Line and Preferred Line Timeout
The 6930 has two parameters called preferred line and preferred line timeout. If you enable the
preferred line parameter on your phone, after a call ends (incoming or outgoing), the display switches
back to the preferred line. Next time you go off-hook to make another call, you pickup on the preferred
line. You can enable the
Preferred Line
parameter using the Mitel Web UI at the location,
Basic
Settings > Preferences > General
.
You can also set a
Preferred Line Timeout
parameter that
specifies the number of seconds it takes for the phone to switch back to the preferred line.
The following table provides the behavior of the preferred line focus feature with other features on
the phone:
Phone Feature
Preferred Line Behavior
Last Call Return
The phone switches back to the focused line immediately after the call ends.
Speed Dial
The line is already specified when the speed dial is created. The phone
switches back immediately after the call ends.
Conference
For incoming calls, the phone switches back immediately after the call ends.
Summary of Contents for MiVOICE 6930
Page 1: ...Mitel 6930 SIP Phone 58015330 REV00 RELEASE 5 0 0 USER GUIDE ...
Page 10: ...Table of Contents xi ...
Page 211: ......
