MISA OPTION CloudGate, Technical Documentation Manual

Page: 123 / 218

120 / 215
Option CloudGate - Last updated on 14/05/2014
I/O jumper configuration
The jumpers allow to make a selection of certain signals on the external I/O connector.
The I/O expander card is delivered with 5 jumpers. The factory default positions are indicated in the
picture (and also in green in the table below):
The table below gives the jumper settings.
The factory settings are shown in green:
Green = jumper present
●
White = no jumper present
●
Important notes:
Jumpers always need to be placed in “vertical position”
●
Do not put any jumper on position 1-2
●
Do not put any jumper on position 3-4
●
The signals on pin 15, 6, 3 and 11 can be configured. The corresponding jumper has to be either on
●