MISA OPTION CloudGate Technical Documentation Manual Download Page 59

Page: 59 / 218

56 / 215

Option CloudGate - Last updated on 14/05/2014

Inbound Port Forwarding

The Inbound Port Forwarding section forwards data from a WAN interface to a designated IP address
and port.

Inbound Port Forwarding

Lists the inbound forwarding rules, up to a maximum of 40.

●

These rules allow you to forward data from a WAN interface to the IP address set in the destination

●

field.
The port forwarding rules have a higher priority than the DMZ rule!

●

Click Add to create a forwarding rule. Enter the port information and target IP address in the dialog

●

box and click Save.

Summary of Contents for OPTION CloudGate



























































































































































































































Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands

MISA OPTION CloudGate, Technical Documentation Manual

Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands