MISA OPTION CloudGate Technical Documentation Manual Download Page 76

Page: 76 / 218

73 / 215

Option CloudGate - Last updated on 14/05/2014

Configuring the VPN

The VPN tab allows adding and configuring IPSec tunnels. By default the

CloudGate has no IPSec tunnels

preconfigured.

A tunnel can easily be added by clicking the “+ add IPsec Tunnel” button, a window wil prompt for the
user to enter a name for the new tunnel.

When the tunnel is successfully added a new field in the VPN tab will appear for each tunnel that is
added.

Tunnels can be removed in the bottom right corner of the field of each tunnel using the “delete tunnel”
button

Configuring a Tunnel

3 elements can be configured for each tunnel.

Summary of Contents for OPTION CloudGate



























































































































































































































Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands

MISA OPTION CloudGate, Technical Documentation Manual

Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands