MISA OPTION CloudGate Technical Documentation Manual Download Page 73

Page: 73 / 218

70 / 215

Option CloudGate - Last updated on 14/05/2014

To create a logfile:

Click Yes to enable logging.

Set additional logging parameters according to Option Customer Support recommendations.

Click Save changes.

Reproduce the CloudGate problem.

Download the log file by clicking Download log file.

Enable logging

If set to Yes, the unit logs all CloudGate activity.

●

Maximum log file size

Sets the maximum log file size. Option recommends 256 kB.

●

Select log levels

Sets the log levels. In order of severity the levels are: Info, Warning, Error, Debug

●

Download log file

Downloads the file to a hard drive or USB stick.

●

Clear log file

Summary of Contents for OPTION CloudGate



























































































































































































































Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands

MISA OPTION CloudGate, Technical Documentation Manual

Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands