MISA OPTION CloudGate Technical Documentation Manual Download Page 178

Page: 178 / 218

175 / 215

Option CloudGate - Last updated on 14/05/2014

Setting the Check-In Frequency

The check-in frequency is the interval at which a device connects to the CloudGate Universe and
checks for updates.

To set the check-in frequency:

Click Provisioning in the menu.

Select the device(s) in the Device list.

In the Device Properties tab, select an option for Check-in frequency.

IMPORTANT

Option recommends caution when setting the check-in frequency to

NEVER

. If

NEVER

is selected, the next time the device connects to the CloudGate Universe, the automatic

check-in function will be turned off permanently. Even if the check-in frequency is changed later,

the device will not connect with the CloudGate Univere and download the new setting.

Summary of Contents for OPTION CloudGate



























































































































































































































Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands

MISA OPTION CloudGate, Technical Documentation Manual

Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands