MISA OPTION CloudGate Technical Documentation Manual Download Page 41

Page: 41 / 218

38 / 215

Option CloudGate - Last updated on 14/05/2014

Mode

This will define the state of the Ethernet interface In case the WAN/LAN Switchover feature is disabled.

●

In case the WAN/LAN swichtover feature is enabled the state of the ethernet interface will be as in

●

the following table:

Result of WAN/LAN switchover
feature

State of "Mode" End result

WAN

LAN

WAN

LAN

WAN

WAN/LAN Switchover

The WAN/LAN switchover feature defines the state of the Ethernet port after the CloudGate is

●

powered on. By default, WAN/LAN Switchover is enabled.

Learn more about the WAN/LAN

switchover feature

If set to Yes the Cloudgate tries to connect to the internet through the ethernet connection, such as

●

an ADSL or cable modem. If a connection is unavailable, the port switches to LAN mode and acts as
a LAN interface.
Set to No to power on the Ethernet port as defined in the "mode" parameter.

●

Summary of Contents for OPTION CloudGate



























































































































































































































Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands

MISA OPTION CloudGate, Technical Documentation Manual

Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands