MISA OPTION CloudGate, Technical Documentation Manual

Page: 128 / 218

125 / 215
Option CloudGate - Last updated on 14/05/2014
Green = jumper present
●
White = no jumper present
●
Important notes:
Jumpers always need to be placed in “vertical position”
●
Jumpers on position 1-2 and 3-4 can be removed if needed, based on the actual topology of the
●
CAN bus
The signals on pin 15, 6, 3 and 11 can be configured. The corresponding jumper has to be either on
●
the left hand side or in the right hand side position. Never put a jumper on both positions at the same
time.
In order to achieve a proper functioning of the I/Os, the FW settings need to correspond with the
settings of the jumpers.
For pin 10 the jumper always needs to be present on pin 21-22. If it is in position 23-24 then pin 10 of
●
the I/O connector is not connected