MISA OPTION CloudGate Technical Documentation Manual Download Page 122

Page: 122 / 218

119 / 215

Option CloudGate - Last updated on 14/05/2014

of all pins will be limited to 80mA max.

I/O connector

The external I/O’s are available on a Molex Micro-Fit 3.0

connector, labeled as “GPIO” on the front

plate.

The following table gives the front view and the pin numbering of the I/O connector.

The pinout of the I/O connector is given in the table below:

(*) factory default jumper settings

The counter connector is a Molex Micro-Fit 3.0

Receptacle Housing, Dual Row, 18 circuits.

Part number of the receptacle housing: 43025-1800.
Part number of the crimp terminals: 43030-0001.
Datasheet and product specification can be found attached:

Micro-Fit 3.0

specifications

Datasheet receptacle

Datasheet crimp terminals

Information about the crimp tools can be found on the Molex website.

Summary of Contents for OPTION CloudGate



























































































































































































































Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands

MISA OPTION CloudGate, Technical Documentation Manual

Search results

Summary of Contents for OPTION CloudGate

Reviews:

Related manuals for OPTION CloudGate

Brands by name

Popular brands