Minolta MAGICOLOR 2 PLUS, Manual

Page: 218 / 262

2 : B *
" "" "
, , , ,
Remove the toner cartridges and gently rock them five
or six times to redistribute the toner. Then, reinstall the
cartridges.
Install new toner cartridges.
Reinstall the OPC belt cartridge. If necessary, replace the OPC
belt cartridge.
The laser lens may be dirty. Clean the lens as described in
chapter 6, “Printer Care.”
The corona wire inside the OPC belt cartridge might be dirty.
Clean the corona wire as described in chapter 6, “Printer
Care.”
One or more toner cartridges may be defective. Check the
toner cartridges, and install new ones, if necessary.
Clean the developer roller.
Reinstall the OPC belt cartridge. If necessary, replace the OPC
belt cartridge.
If a wide vertical white band appears:
Check the transfer drum surface. If necessary, clean the oil off
the surface.
Ensure that the transfer unit is closed.