5 29
A2*
11 Tilt the paper path.
Caution:
Hold the paper path unit by
its corners to avoid the unit catching
your fingers between it and the cover.
12 Remove the jammed media in the
paper path by pulling it toward
you.
If the media came out easily, close
the duplexer’s rear cover.
If the media did not come out easily,
keep the duplexer’s rear cover open.
13 If there still is a jam message,
open the printer’s top cover.
Pull the top latch to release the top
cover.
»
Note:
The illustration for step 13
shows the printer without the
duplexer. However, the instructions
are the same for both models.
Caution:
If you have a duplex model,
make sure you have opened the
duplexer’s rear cover first. Forced
opening of the top cover first may
damage the unit.
Summary of Contents for MAGICOLOR 2 PLUS
