' *
*#%
(22
&# '9
You can check communication between the printer selected in the Chooser and the
Macintosh by sending a file to the printer from an application (see your application
documentation for more information) or by printing a directory, as described here:
1
Display a disk or folder window.
2
Set up page information.
a
From the File menu choose Page Setup.
b
Select paper size, orientation, and other necessary options.
c
Choose OK.
3
Print a directory or a window.
a
From the File menu choose Print Directory or Print Window. A dialog box
appears.
b
Select the printing options you want, and then choose OK.
' .
This section contains a list of possible printer problems and solutions. Be sure you’ve
followed the steps in the QMS
magicolor 2+ Installation Guide.
If there is no status message in the control panel message window, use the following
steps to identify the source of your problem and to learn of possible solutions:
1
Does the printer power light come on?
YES - Go to number 2.
NO - Check the following:
Is power supplied to the AC outlet.
Summary of Contents for MAGICOLOR 2 PLUS
