Minolta MAGICOLOR 2 PLUS, Manual

Page: 184 / 262

* 9
** *
BACK PANEL OPEN
The rear cover over the transfer
unit is not closed. Close the rear cover.
BELT CARTRIDGE
MIS-INSTALLED
The OPC belt cartridge is either
missing or incorrectly installed. Ensure that an OPC belt
cartridge is correctly
installed.
CANCEL JOB
The Cancel key has been
pressed, and one or more of the
print jobs in the print queue are
being canceled. Press Select and the
oldest job in the print
queue will be canceled.
CANCEL ALL JOBS
The Cancel key has been
pressed, and one or more of the
print jobs in the print queue are
being canceled. Press Select for all jobs
with a printing,
interpreting, spooled, or
terminating status to be
completely removed
from the system.
CHECK CLEANING
ROLLER
The cleaning roller needs to be
replaced. Install a new cleaning
roller.
CHECK WASTE TONER
Either the waste toner pack is
full and needs to be replaced, or
it is incorrectly installed. Ensure that the waste
toner pack is not full and
is correctly installed.
CLOSE ENGINE DOOR(S)
One or more of the front or side
covers is open and must be
closed. Close the front or side
covers.
COOLDOWN
After 200 1-sided (or 100
2-sided) pages of a continuous
print run of plain paper, the
magicolor 2+ automatically
pauses for 3 minutes to cool
down the engine No action needed.
CREATED FILE
The accounting file has been
created. No action needed.
This status message... means... Do this...