Minolta MAGICOLOR 2 PLUS, Manual

Page: 199 / 262

1 Turn the printer off and on again to produce a startup page.
2 Compare the serial port settings listed on the startup page to those in your
AUTOEXEC.BAT file.
3 Try the communication test again.
If a blank page ejects from the printer, the printer and the PC are communicating. If a
blank page doesn’t eject and you typed the file correctly, refer to your DOS documen-
tation for more information.
Select Access the Baud Rate menu.
BAUD RATE
*9600
Next (one or
more times) Advance to the correct baud rate.
BAUD RATE
#
Select Select the displayed baud rate.
#
IS SELECTED
SERIAL
BAUD RATE
» Note: If you need to change other settings, press the Next key to access the appropriate
menu option, and then return to the point where you press the Select key to access the
Administration menu and select the new settings.
Online/Offline
Access the Save Changes option.
SAVE CHANGES?
*NO
Next Advance to the Yes option.
SAVE CHANGES?
YES
Select
Save changes.
IDLE
Online/Offline Put the printer back on line (the Ready
indicator lights).
IDLE
Press this key... to... The message window reads...