Minolta MAGICOLOR 2 PLUS, Manual

Page: 72 / 262

Use this procedure when you are sure the job has finished being sent from the host
and the message window displays
WAITING ON INPUT
END JOB?
» Note: This procedure does not end print jobs that are still receiving data. Its only
purpose is to provide an end-of-job indicator for a print job that does not have one. You
can identify an end-of-job indicator in the Administration/Communications/Parallel and
Administration/Communications/Serial menu. (Refer to chapter 5, “Additional
Technical Information,” in the Reference Manual for a complete discussion of End Job
Mode.
Chapter 5, “Color Printing,” explains advanced color laser technology.
Press this key... to... The message window
reads...
Cancel Access the Job Cancel menu.
JOB CANCEL
CANCEL JOB
Next (twice) Advance to the End Job mode.
JOB CANCEL
END JOB
Cancel or Select Select End Job.
END JOB
IS SELECTED