Minolta MAGICOLOR 2 PLUS, Manual

Page: 104 / 262

() # %
9 If you have a duplexer, using
a dry cotton cloth, clean any
paper dust and toner buildup
from the interior of the duplexer.
If not, skip to step 17.
» Note: A dry cotton cloth is required for
these procedures.
10 Tilt the paper path toward the inside
of the printer.
Using a dry cotton cloth, clean any
paper dust and toner buildup from
the interior of the paper path.
11 Clean the registration rollers.
12 Close the duplexer’s rear cover.
13 Remove the duplexer’s lower rear assembly.
14 Using a dry cotton cloth,
clean any paper dust and
toner buildup from the lower
rear assembly and its registration
rollers.
15 Reach underneath the printer and
clean with a dry cotton cloth.
16 Reinsert the duplexer’s lower rear
assembly.
17 Plug in the printer, and turn it on.
» Note: In compliance with UL
guidelines, “The appliance inlet is
considered to be the main disconnect
device.”