MINOLTA-QMS ENord magicolor 3100, User Manual

Page: 62 / 204

Introduction 56
Introduction
How do I handle the printer?
„
Handle the printer with care to preserve its life. Abuse may cause
damage.
„
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the inside of
the printer’s covers and the interior of the printer body.
„
Do not tilt the printer more than 10° in any direction.
5 "
For best output quality and longest consumables life, keep the
printer on a hard, flat, level (within ±5°) surface capable of support-
ing about 119 lbs (53.9 kg). A surface can be tested for levelness
with a standard round pencil. If the pencil rolls, the surface is not
level.
„
Do not tap paper stacks on the printer.
„
Do not oil, lubricate, or disassemble the printer.
„
Do not touch the transfer roller cartridge, electrical contacts, gears, or
laser beam devices. Doing so may damage the printer and cause the print
quality to deteriorate.
„
Keep media in the output tray at minimum level.
If the media stacks too high, your printer may experience media jams,
excessive media curl, or built-up static. Remove transparency media as
soon as it’s printed.
„
Handle toner carefully.
„
Do not use toner cartridges if they have been removed from the printer.
Take care to avoid toner spillage caused by shaking or bumping the toner
cartridge.
5 "
The toner is nontoxic. If you get toner on your skin, wash it off with
cool water and neutral detergent. If you get toner on your clothes,
lightly dust them off as much as possible. If some toner remains on
your clothes, use cool, not hot water, to rinse the toner off,
provided your clothing is washable.
“How do I handle the printer?” page 56
“When does the printer need cleaning? page 58
“What cleaning materials should I use?” page 58
“How do I clean the density sensor?” page 60
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500