manualshive.com logo in svg

MINOLTA-QMS ENord magicolor 3100, User Manual

Share
Download
MINOLTA-QMS ENord magicolor 3100 User Manual Download Page 126

Emulations, Fonts, and Other Software

120

Fonts and Forms

MINOLTA-QMS Font & Form Center

The MINOLTA-QMS Font & Form Center serves our customers with custom 
fonts, logos, signatures, and forms. Further information can be found on the 
web at http://www.minolta-qms.com/products/fontcenter/index.html or by 
phone in the US at (251) 634-4FONT. The MINOLTA-QMS Font & Form 
Center

„

Maintains a library of PCL, PostScript, LN03 Plus, and MINOLTA-QMS 
QUIC fonts.

„

Develops custom PCL, PostScript, LN03 Plus, and MINOLTA-QMS 
QUIC fonts.

„

Develops PCL, PostScript, and MINOLTA-QMS QUIC signatures.

„

Develops PCL, PostScript, and MINOLTA-QMS QUIC logos and graphics.

„

Develops QFORM, PlanetPress, and Word forms. 

„

Archives files at no extra cost.

QFORM

The MINOLTA-QMS QFORM option allows you to use existing lineprinter and 
forms printing applications on your magicolor

 

3100 printer. This printer resi-

dent application gives you the ability to store PostScript forms on the printer’s 
hard disk and fill those forms with your application’s ASCII print stream. 
Features include

„

Definition of page formatting and fonts

„

Duplexing with binding-margin offsets

„

Two-sided forms with text fill-in on front and/or back

„

“Gray bar” listing formats

„

Automatic page numbering

„

ANSI carriage-control recognition

„

Single- and multipart forms

„

Labels

„

Logos and watermarks

5

"

MINOLTA-QMS QFORM doesn’t support color features.

QFORM allows you to use existing lineprinter and forms-printing applications 
on your magicolor 3100. This printer-resident application gives you the ability 
to store PostScript forms on the printer’s hard disk and fill those forms with 
your application’s ASCII print stream. 

ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for ENord magicolor 3100













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands