manualshive.com logo in svg

MINOLTA-QMS ENord magicolor 3100, User Manual

Share
Download
MINOLTA-QMS ENord magicolor 3100 User Manual Download Page 125

Emulations, Fonts, and Other Software 

119

9

When the Disk light stops flashing and the printer’s message window 
reads 

IDLE 

for at least 30 seconds, turn the printer off and then on again.

The emulation should be listed in the Options section of the printer’s 
startup page, in the Administration/Emulation printer’s configuration 
menu, and on the advanced status page.

5

"

You may want to erase any installation files left on your computer 
(and/or workstation), and then remove any temporary directories.

Using an Optional Emulation

Refer to the documentation that came with your emulation for configuration 
and usage instructions.

ImageServer

MINOLTA-QMS ImageServer technology provides a high-performance, 
cost-effective way for businesses using document imaging to print their 
stored image files. For complete information, refer to the documentation that 
comes with the ImageServer option.

TIFF, CALS: A CCITT emulation (Group 4, monochrome only) is available 
through the MINOLTA-QMS ImageServer option, which image-enables your 
printer, allowing it to print many images at or near the rated engine speed and 
eliminating the need for a computer dedicated to rasterizing images. 

LN03 Plus

An LN03 Plus emulation offers all of the features on an LN03 Plus laser 
printer, including DECTEK emulation and Digital’s Tektronix 4014 emulation.

If you already have files containing LN03 Plus escape sequences, or if you 
have set our application to print to an LN03 Plus printer, you only need to fol-
low its installation instructions to begin using the emulation in your 
MINOLTA-QMS printer.

„

Host software compatibility—Since LN03 Plus runs under VMS, VMS 
compatibility is important. the MINOLTA-QMS VMS DECnet host software 
2.

x 

is compatible with version 3.

x

 MINOLTA-QMS daughterboard soft-

ware.

„

Printer compatibility—This LN03 Plus emulation can be installed only 
on MINOLTA-QMS printers that contain a hard disk drive (either internal 
or external).

ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for ENord magicolor 3100













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands